In-vehicle Repair Special Tool(s) | Installer/Aligner, Timing Cover Seal 303-055 (21-017 A) | | Remover, Seal 303-112 (21-051) | | Remover/Installer, Crankshaft Vibration Damper 303-130 (21-076) | Materials Name Specification Engine Oil - 5W-30 WSS-M2C913-B Removal | -
Remove the crankshaft pulley. For additional information, refer to: Crankshaft Pulley (303-01D Engine - 3.0L Duratec-SE (VE6)/3.0L Duratec-ST (VE6), In-vehicle Repair). | | -
Using the special tool, remove the crankshaft front seal. | Installation | -
Using the special tools and the crankshaft pulley bolt washer, install the crankshaft front seal. - Lubricate the outer ring of the seal with clean engine oil.
| | -
Install the crankshaft pulley. For additional information, refer to: Crankshaft Pulley (303-01D Engine - 3.0L Duratec-SE (VE6)/3.0L Duratec-ST (VE6), In-vehicle Repair). | | |