Mustang V8-4.6L VIN H (2005)
8. Release the wire routing clip and the electrical connector retainer from the bracket.
9. NOTE: Note position of wire routing for installation.
Disconnect the safety belt buckle switch electrical connector and release the connector retainer from the seat cushion pan.
Seats with a production occupant classification sensor (OCS)
10. Release the 2 pin-type retainers and remove the 4 nuts and the seat track assembly.
Seats with a service kit OCS
11. Position aside the OCS bladder and foam pad assembly and remove the 4 nuts (2 rear shown) and the seat track assembly.