ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Tire Low Pressure Sensor > < Wheels and Tires

S-MAX.Galaxy 2006.5 (03.2006-)

Wheels and Tires - Wheel and Tire S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Removal

CAUTION:
CAUTION:Do not use heat to loosen a seized wheel nut.
  1. Loosen the wheel nuts.
  1. Raise and support the vehicle.
    Refer to: Jacking (100-02 Jacking and Lifting, Description and Operation).
    Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

Installation
  1. WARNING:
    WARNING:Make sure that the mating faces are clean and free of corrosion and foreign material
    NOTE:
    NOTE:Only tighten the nuts finger tight at this stage.
  1. Lower the vehicle.

  1. Tighten the wheel nuts in the sequence shown.
    Torque:
    Steel wheel nut M12 silver 140 Nm
    2-piece alloy wheel nut M12 with conical washer 140 Nm
    2-piece alloy wheel locking nut M12 with conical washer 110 Nm
    1-piece alloy wheel locking nut M12 140 Nm
    All nuts M14 including locking nuts 170 Nm

Tire Low Pressure Sensor > < Wheels and Tires