Removal and Installation Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). Refer to: Diesel Fuel System Health and Safety Precautions (100-00 General Information, Description and Operation). Refer to: Air Cleaner (303-12E Intake Air Distribution and Filtering - 2.2L Duratorq-TDCi (DW) Diesel, Removal and Installation). | | -
CAUTION:Make sure that the fuel line remains in contact at both ends until both unions nuts have been unscrewed and the area around the joints thoroughly cleaned. CAUTION:Make sure that all openings are sealed. Use new blanking caps. Refer to: Fuel Injection Component Cleaning (303-04E Fuel Charging and Controls - 2.2L Duratorq-TDCi (DW) Diesel, General Procedures). Torque: Stage 1: 22 Nm Stage 2: 25 Nm | | -
Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures). | | -
NOTE:Make sure that a new component is installed. Torque: 1: 10 Nm 2: 8 Nm 3: 10 Nm | | -
CAUTION:Make sure that all openings are sealed. Use new blanking caps. CAUTION:Make sure that the area around the component is clean and free of foreign material. NOTE:Install all the bolts finger tight before final tightening. -
Torque: Stage 1: 22 Nm Stage 2: 25 Nm | Installation | -
To install, reverse the removal procedure. | | |