Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube >
< Exhaust Gas Recirculation (EGR) Valve
S-MAX.Galaxy 2006.5 (03.2006-)
Mechanical Repairs
3 Powertrain / 303 Engine
303-08D Engine Emission Control - 2.0L Duratorq-TDCi (DW) Diesel / Description and Operation / Diagnosis and Testing
Removal and Installation
Exhaust Gas Recirculation (EGR) Cooler
Engine Emission Control - 2.0L Duratorq-TDCi (DW) Diesel - Exhaust Gas Recirculation (EGR) Cooler
S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation
General Equipment
Hose clamp remover/installer
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Drain the cooling system.
Refer to: Cooling System Draining, Filling and Bleeding (303-03D, General Procedures).
Torque:
22 Nm
Detach the A-pillar exterior trim panel lower clips.
Torque:
10 Nm
General Equipment:
Hose clamp remover/installer
Torque:
10 Nm
NOTE:
Note the orientation of the clamp to aid installation.
NOTE:
The gasket is to be reused unless damaged.
Discard the clamp.
Torque:
30 Nm
Torque:
10 Nm
Torque:
10 Nm
Installation
NOTE:
Make sure that a new clamp is installed.
NOTE:
Make sure that the clamp is installed to the same orientation as when removed.
To install, reverse the removal procedure.
Mechanical Repairs
3 Powertrain / 303 Engine
303-08D Engine Emission Control - 2.0L Duratorq-TDCi (DW) Diesel / Description and Operation / Diagnosis and Testing
Removal and Installation
Exhaust Gas Recirculation (EGR) Cooler
Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube >
< Exhaust Gas Recirculation (EGR) Valve