ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Engine Emission Control > < Exhaust Gas Recirculation (EGR) Cooler

S-MAX.Galaxy 2006.5 (03.2006-)

Engine Emission Control - 2.0L Duratorq-TDCi (DW) Diesel - Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.

  1.  
    1. Torque: 22 Nm
    1. Detach the A-pillar exterior trim panel lower clips.

  1.  
    1. Torque: 10 Nm

  1. NOTE:
    NOTE:Note the orientation of the clamp to aid installation.
    NOTE:
    NOTE:The gaskets are to be reused unless damaged.
    1. Torque: 5 Nm
    1. Torque: 10 Nm
    1. Discard the clamp.
    1. Torque: 10 Nm

Installation

  1. NOTE:
    NOTE:Make sure that a new clamp is installed.
    NOTE:
    NOTE:Make sure that the clamp is installed to the same orientation as when removed.
    To install, reverse the removal procedure.

Engine Emission Control > < Exhaust Gas Recirculation (EGR) Cooler