Removal and Installation Special Tool(s) | 205-078 Remover, Drive Pinion Seal | | 307-300 Gauge Bar, Shim Selection | | 307-300-02 Depth Gauge, Shim Selection | | 307-300-03 Adapter for 307-300-02 | | 308-095 Installer, Input Shaft Bearing | Materials Name Specification Automatic Transmission Fluid WSS-M2C924-A Removal | -
Refer to: Getriebe (307-01 Automatikgetriebe - Fahrzeuge ausgestattet mit 6-Gang Automatikgetriebe (AWF21), Removal and Installation). | | -
Check the mating face of the torque converter for damage. | Installation | -
CAUTION:New crankshaft rear seal carriers are supplied with an alignment sleeve which must be removed after installation. CAUTION:Make sure that the specified installation depth is achieved. X = 0mm +/- 0.2mm | | -
CAUTION:Take extra care not to damage the seal. Coat the mating face of the torque converter with oil. | | -
CAUTION:Make sure that the specified installation depth is achieved. X = greater than 34.5mm | | -
CAUTION:Ensure the torque converter remains with the transmission. Refer to: Getriebe (307-01 Automatikgetriebe - Fahrzeuge ausgestattet mit 6-Gang Automatikgetriebe (AWF21), Removal and Installation). | |