Removal and Installation Materials Name Specification Sealant - Loctite 518 WSK-M2G348-A5 Removal | -
Refer to: Gesundheits- und Sicherheitsvorkehrungen (100-00 Allgemeine Informationen, Description and Operation). | | -
Remove the transmission. Refer to: Getriebe - 1.8L Duratorq-TDCi (Lynx) Diesel (308-03A Schaltgetriebe - Fahrzeuge ausgestattet mit 5-Gang Schaltgetriebe (MTX-75), Removal). Refer to: Getriebe - 2.0L Duratec-HE (MI4) (308-03A Schaltgetriebe - Fahrzeuge ausgestattet mit 5-Gang Schaltgetriebe (MTX-75), Removal). | | -
Discard the clutch slave cylinder and its bolts. | Installation | -
Wrap the input shaft splines with adhesive tape to protect the input shaft oil seal from damage. | | -
NOTE:Use a new clutch slave cylinder/clutch release bearing. | | -
NOTE:Install new clutch slave cylinder bolts. Torque: 11 Nm | | -
Remove the adhesive tape from the input shaft splines. | | -
Install the transmission. Refer to: Getriebe - 1.8L Duratorq-TDCi (Lynx) Diesel (308-03A Schaltgetriebe - Fahrzeuge ausgestattet mit 5-Gang Schaltgetriebe (MTX-75), Installation). Refer to: Getriebe - 2.0L Duratec-HE (MI4) (308-03A Schaltgetriebe - Fahrzeuge ausgestattet mit 5-Gang Schaltgetriebe (MTX-75), Installation). | | -
Bleed the clutch system. Refer to: Kupplungssystem entlüften (308-00 Schaltgetriebe und Kupplung - Allgemeine Informationen, General Procedures). | | |