ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Blower Motor - RHD > < Air Conditioning (A-C) Compressor - 1.8L Duratorq-TDCi (Lynx) Diesel-2.0L Duratorq-TDCi (DW) Diesel
Climate Control - Blower Motor S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

Special Tool(s)

412-131
Remover/Installer, Blower Engine

Removal

All vehicles

LHD Vehicles

  1. Special Tool(s): 412-131
Right-hand drive vehicles
  1. Remove the clutch master cylinder.
    Refer to: Clutch Master Cylinder (308-02B Clutch Controls - Vehicles With: 6-Speed Manual Transmission (MMT6), Removal and Installation).
    Refer to: Clutch Master Cylinder (308-02C Clutch Controls - Vehicles With: 6-Speed Manual Transmission (M66), Removal and Installation).

  1. Special Tool(s): 412-131
  1.  
    1. If equipped.
All vehicles

  1. CAUTION:
    CAUTION:The blower motor must only be set down on the workbench with the fan wheel facing upward.
    Using the special tool, remove the blower motor from the passenger's side.

Installation

  1. NOTE:
    NOTE:The component can only be installed in one position.
    Install the components in reverse order.

Blower Motor - RHD > < Air Conditioning (A-C) Compressor - 1.8L Duratorq-TDCi (Lynx) Diesel-2.0L Duratorq-TDCi (DW) Diesel