Removal and Installation General Equipment Flat-bladed screwdriver Ford diagnostic equipment Removal NOTE:Make sure that any media is ejected from the unit. | -
NOTE:This step is only necessary when installing a new component. Connect the diagnostic tool and upload the audio unit configuration information using the Programmable Modules Installation Routine, prior to commencing the removal of the audio unit. | | -
CAUTION:Use suitable packing material to prevent damage to the component. | | -
CAUTION:Use suitable packing material to prevent damage to the component. | Vehicles with manual temperature control Vehicles with electronic automatic temperature control (EATC) All vehicles Installation | -
NOTE:New units must be configured using the Programmable Module Installation Routine in the diagnostic tool. To install, reverse the removal procedure. | |