Ford Streetka Workshop Service and Auto Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Oil Pump >
< In-vehicle Repair|Oil Pan
Streetka 20035 Crankshaft Rear Seal Replacement
Mechanical Repairs
3 Powertrain / 303 Engine
303-01B Engine - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)
Description and Operation
Diagnosis and Testing
In-vehicle Repair
Crankshaft Rear Seal
Engine - 1.3L Duratec-8V (Rocam)/1.6L Duratec-8V (Rocam) - Crankshaft Rear Seal
Streetka 2003.5 (01/2003-07/2005)
In-vehicle Repair
Removal
Remove the oil pan.
For additional information, refer to
Oil Pan -
in this section.
Remove the crankshaft rear seal carrier.
Discard the crankshaft rear seal carrier.
Installation
CAUTION:
Do not remove the plastic installation sleeve before installation.
NOTE:
Install a new crankshaft rear seal carrier.
NOTE:
A new rear seal carrier is supplied preassembled with an installation sleeve that must be removed following installation.
NOTE:
Do not touch the dust lip or the sealing lip.
NOTE:
The sealing lip must be free of oil.
NOTE:
Make sure that the dowel pins are correctly seated.
Install the crankshaft rear seal carrier.
Discard the installation sleeve.
Install the oil pan.
For additional information, refer to
Oil Pan -
in this section.
Mechanical Repairs
3 Powertrain / 303 Engine
303-01B Engine - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)
Description and Operation
Diagnosis and Testing
In-vehicle Repair
Crankshaft Rear Seal
Oil Pump >
< In-vehicle Repair|Oil Pan