Taurus AWD V6-3.5L (2009)
82. Install the PSP tube bracket-to-steering gear bolt.
-
Tighten to 10 Nm (89 lb-in).
83. NOTE: Lubricate the engine oil filter gasket with clean engine oil prior to installing the oil filter.
Install a new engine oil filter.
-
Tighten to 5 Nm (44 lb-in) and then rotate an additional 180 degrees.
AWD vehicles
84. Line up the index marks on the rear driveshaft to the index marks on the PTU flange made during removal and install the 4 bolts (3 shown).
-
Tighten to 70 Nm (52 lb-ft).
All camshafts
85. Using a new gasket, install the Y-pipe and install the 2 new nuts.
-
Tighten to 40 Nm (30 lb-ft).
-
Attach the exhaust hanger.
86. Install the Y-pipe assembly and 4 new nuts.