Taurus AWD V6-3.5L (2009)
![background image](/ford/taurus_awd/v6-3.5l/Page-578048.png)
92. Install the ground cable and bolt.
-
Tighten to 12 Nm (106 lb-in).
93. Attach the wire harness retainer to the RH valve cover stud bolt.
94. Attach the wiring harness retainer to the engine mount bracket stud bolt.
95. Connect the 2 engine wiring harness electrical connectors.
-
Attach the electrical connector to the LH valve cover.
96. Connect the fuel supply tube to the fuel rail.
97. Using a new O-ring seal, install the A/C tube and the bolt.
-
Tighten to 15 Nm (133 lb-in).