| General Procedures | | -
Load the CD from the diagnostic tester. | | | -
Select the "Module Configuration" menu. | | | -
Select the relevant module. The vehicle data must be read off before the module is removed. If the relevant module is not communicating with the diagnostic tester, contact the Hotline and quote the vehicle identification number (VIN). | | | -
Read off the module code and/or vehicle data from the defective module. | | | -
Remove the defective module and install the new module as described in the operation - PCM / Module - Passive Anti-Theft System (PATS)
- Central Timer Module (CTM)
| | | -
Using the diagnostic tester, configure the new module according to the model variant. | | | -
Separate the diagnostic tester from the DLC. | | | -
Check the operation of the relevant system(s). | | |
