Changes on the 2.5 diesel engine (76 PS) from '95 MY
| 1 | Engine mounting bracket |
| 2 | Hydraulic engine mounting |
| 3 | Vehicle chassis |
| 4 | MT75 manual transmission |
| 5 | Rear engine mounting ‐ manual transmission |
| 6 | Transmission crossmember |
| 7 | A4LD automatic transmission |
| 8 | Rear engine mounting ‐ automatic transmission |
| 1 | Radiator |
| 2 | Auxiliary fans |
| 3 | Blanking plug |
| 4 | Coolant shut‐off valve |
| 5 | Solenoid valve for shut‐off valve |
| 6 | Connection to heater radiator |
- The cooling of the diesel engine has been improved by fitting a larger fan with a diameter of 420 mm.
- All the engines have been fitted with coolant hoses of a new type.
- On vehicles with air conditioning, adequate cooling is assured by two 165 mm electrically operated auxiliary fans mounted on the side of the radiator.
Drive belt routing
- 1 Alternator
- 2 Fan
- 3 Water pump
- 4 Crankshaft pulley/vibration damper
Auxiliary belt for air conditioning
- 1 Crankshaft pulley/vibration damper
- 2 Power steering pump
- 3 Tensioning pulley
- 4 Air conditioning compressor
Auxiliary belt for additional PTC heater
- 1 Crankshaft pulley/vibration damper
- 2 Power steering pump
- 3 Tensioning pulley
- 4 Additional alternator for PTC heater
Air cleaner
- 1 Air intake hose
- 2 Air cleaner casing
