Lubricants, Fluids, Sealers and Adhesives
Item | Specification |
SAE 75W-140 High performance rear axle oil | WSL-M2C192-A |
Grease | WSD-M1C228-A |
Thread-locking compound | WSK-M2G349-A7 |
Sealer | WSS-M4G320-A3 |
Capacities
Clearance, Tolerance and Adjustments
Description | Specification |
Drive pinion best height setting | a) |
Drive pinion turning torque | a) |
Ring gear backlash | 0.127-0.228 mm |
Ring rear backlash — maximum variation between teeth | 0.100 mm |
a) Refer to the procedure in this section.
Torque Specifications
Description | Nm | lb-ft | lb-in |
Driveshaft to drive pinion flange bolts | 80 | 59 | – |
Drive pinion flange locknut | 365 | 270 | – |
Ring gear retaining bolts | 177 | 130 | – |
Differential bearing cap retaining bolts | 110 | 81 | – |
Differential housing cover retaining bolts | 61 | 45 | – |
Axle shaft retaining bolts | 134 | 99 | – |
Stabilizer bar retaining bolts | 40 | 30 | – |
Oil filler plug | 34 | 25 | – |
Brake backing plate retaining bolts | 99 | 73 | – |
Parking brake cable to chassis retaining bolt | 22 | 16 | – |
Spring U-bolt nuts | a) | – | – |
Wheel speed sensor retaining bolt | 8 | – | 71 |
Wheel speed sensor bracket retaining bolt | 8 | – | 71 |
Brake load sensor proportioning valve bracket retaining bolts | 15 | 11 | – |
Brake hose retaining bracket to axle housing retaining bolt | 15 | 11 | – |
Shock absorber lower retaining nut and bolt | 90 | 66 | – |
Wheel cylinder union | 14 | 10 | – |
a) Refer to the procedure in this section.