ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

303-01B Engine - 2.2L Duratorq-TDCi (Puma) Diesel > < Assembly|Installation|Engine
Engine - 2.3L Duratec-HE (MI4) - Specifications Transit 2006.5 (04/2006-)

Engine Data

Description
Engine code GZFA GZFB
Firing order 1-3-4-2 1-3-4-2
Emission level Stage IV Stage III
Bore 87,5 mm 87,5 mm
Stroke 94 mm 94 mm
Cubic capacity 2261 cm³ 2261 cm³
Compression ratio 9.7 : 1 9.7 : 1
Maximum Power output at 5250 rpm 107 kW (145 PS) 107 kW (145 PS)
Maximum torque at 3850 rpm 210 Nm 210 Nm
Maximum engine speed (intermittent) 6500 rpm 6500 rpm
Maximum engine speed (continous) 6500 rpm 6500 rpm
Idle speed 750 rpm 750 rpm
Number of main bearings 5 5
Camshaft drive Chain Chain
Oil consumption 0.5 l/1000 Km 0.5 l/1000 Km

Engine Oil

Viscosity / ambient temperature Type Specification
Recommended engine oil
SAE 5W-30 / below -20°C to over +40°C Ford Formula E WSS-M2C913-B
Alternative engine oils (for top-up only)
SAE 10W-40 / -20°C to over +40°C Ford Formula XR+ ACEA A3/B3
SAE 5W-40 / below -20°C to over +40°C Ford Formula S/SD ACEA A3/B3

Engine Oil Capacity

Description Liters
Service fill including filter 4,3
Service fill excluding filter 3,9

Lubricants, Fluids, Sealers and Adhesives

Specifications
Sealant for oil pan, cylinder block and front cover mating faces WSE-M4G323-A4
Sealant front cover plugs WSK-M2G349-A7

Valve Clearance

Description mm
Valve clearance (engine cold), intake 0.22 - 0.32
Valve clearance (engine cold), exhaust 0.25 - 0.35

For vehicles converted to CNG or LPG, check the valve clearance at 60,000 km (40,000 miles) intervals. If the valve clearance is less than 0.2 mm, adjust the valves to the maximum valve clearance.

303-01B Engine - 2.2L Duratorq-TDCi (Puma) Diesel > < Assembly|Installation|Engine