Engine Data — 85 PS
| Description | |
| Code | P8FA |
| Firing order | 1-3-4-2 |
| Bore diameter | 86 mm |
| Stroke | 94.6 mm |
| Displacement | 2198 cc |
| Compression ratio | 17.5:1 |
| Power output at 3500 rpm | 62 kW (85 PS) |
| Torque between 1500 to 2200 rpm | 250 Nm |
| Idle speed | 750 rpm |
Engine Data — 110 PS
| Description | |
| Code | QVFA |
| Firing order | 1-3-4-2 |
| Bore diameter | 86 mm |
| Stroke | 94.6 mm |
| Displacement | 2198 cc |
| Compression ratio | 17.5:1 |
| Power output at 3500 rpm | 81 kW (110 PS) |
| Torque between 1500 to 2200 rpm | 285 Nm |
| Idle speed | 750 rpm |
Engine Data — 130 PS
| Description | |
| Code | QWFA |
| Firing order | 1-3-4-2 |
| Bore diameter | 86 mm |
| Stroke | 94.6 mm |
| Displacement | 2198 cc |
| Compression ratio | 17.5:1 |
| Power output at 4000 rpm | 96 kW (130 PS) |
| Torque between 1600 to 2500 rpm | 310 Nm |
| Idle speed | 750 rpm |
Engine Oil Capacity
| Description | Liters |
| Initial fill including oil filter | 6.72 |
| Service fill including oil filter | 6.14 |
Cylinder Block Dimensions
| Description | mm |
| Cylinder bore diameter — Class A | 86.000 - 86.010 |
| Cylinder bore diameter — Class B | 86.010 - 86.020 |
| Cylinder bore diameter — Class C | 86.020 - 86.030 |
| Main bearing shells 1 to 4 inner diameter — bearings installed | 65.003 - 65.030 |
| Main bearing shell 5 inner diameter — bearings installed | 70.004 - 70.033 |
| Main bearings 1 to 4 radial clearance | 0.033 - 0.080 |
| Main bearing 5 radial clearance | 0.034 - 0.083 |
| Main bearings 1 to 4 parent bore diameter — vertical measurement | 69.504 - 64.520 |
| Main bearing 5 parent bore diameter — vertical measurement | 74.504 - 74.520 |
| Main bearings 1 to 4 parent bore diameter — horizontal measurement | 69.502 - 69.525 |
| Main bearing 5 parent bore diameter — horizontal measurement | 74.502 - 74.525 |
Piston Dimensions
| Description | mm |
| Piston diameter — Class A | 85.94 - 85.95 |
| Piston diameter — Class B | 85.95 - 85.96 |
| Piston diameter — Class C | 85.96 - 85.97 |
| Piston clearance in cylinder | 0.05 - 0.07 |
| Piston ring end gaps | |
| — upper compression ring | 0.25 - 0.50 |
| — lower compression ring | 0.50 - 0.75 |
| — oil control ring | 0.25 - 0.50 |
Piston ring gap position: The piston ring gaps must be distributed evenly around the circumference of the piston. This also applies to the oil control ring elements. Align the piston ring gaps at 120 degrees to each other.
Crankshaft Dimensions
| Description | mm |
| Main bearing journal end float | 0.090 - 0.305 |
| Main bearing journals 1 to 4 diameter | 64.950 - 64.970 |
| Main bearing journal 5 diameter | 69.950 - 69.970 |
| Connecting rod bearing journal diameter | 52.980 - 53.000 |
Connecting Rod Dimensions
| Description | mm |
| Large end bore diameter | 55.096 - 56.015 |
| Small end bore diameter | 30.010 - 30.018 |
| Connecting rod bearing shell inner diameter — bearings installed | 53.017 - 53.043 |
| Connecting rod bearing radial clearance | 0.034 - 0.100 |
| Connecting rod bearing axial clearance | 0.100 - 0.320 |
Piston Pin Dimensions
| Description | mm |
| Piston pin length | 66.700 |
| Piston pin diameter | 30.000 |
| Piston pin slide clearance | 0.002 – 0.012 |
Camshaft Dimensions
| Description | mm |
| Camshaft end float | 0.014 - 0.20 |
| Camshaft bearing journal diameter | 26.450 |
| Camshaft bearing clearance — radial measurement | 0.065 |
Valve Dimensions
| Description | mm |
| Valve stem to valve guide clearance — intake valve | 0.045 |
| Valve stem to valve guide clearance — exhaust valve | 0.055 |
Cylinder Head Dimensions
| Description | mm |
| Maximum distortion — measured longitudinally and diagonally | 0.10 |
| Peak to valley height of mating surface | 0.02 |
| Thickness of cylinder head gasket with piston protrusion of 0.430 - 0.520 mm | 1.1 (one hole/tooth) |
| Thickness of cylinder head gasket with piston protrusion of 0.521 - 0.570 mm | 1.15 (two hole/teeth) |
| Thickness of cylinder head gasket with piston protrusion of 0.571 - 0.620 mm | 1.2 (three holes/teeth) |
Oil Pressure Specifications
| Description | bar |
| Minimum oil pressure at idle speed | 1.25 |
| Minimum oil pressure at 2000 rpm | 2.0 |
Lubricants, Fluids, Sealers and Adhesives
| Item | Specification |
| Ford Formula E SAE 5W-30 engine oil | WSS-M2C913-A |
| Sealer — oil pan, camshaft carrier and engine front cover | WSE-M4G323-A4 |
