ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
308 Manual Transmission-Transaxle, Clutch and Transfer Case > < Crankshaft Position (CKP) Sensor - 2.3L Duratec-HE (MI4)

Transit 2006.5 (04.2006-)

Electronic Engine Controls - Crankshaft Position (CKP) Sensor—2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel Transit 2006.5 (04/2006-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. Discard the CKP sensor.

Installation
  1. CAUTION:
    CAUTION:Only rotate the crankshaft clockwise.
    Rotate the crankshaft until a flywheel tooth is visible through the CKP sensor housing.

  1. CAUTION:
    CAUTION:The tip of the sensor must rest on a flywheel tooth.
    NOTE:
    NOTE:Make sure that a new component is installed.
    Torque: 7 Nm

  1. Lower the vehicle.

308 Manual Transmission-Transaxle, Clutch and Transfer Case > < Crankshaft Position (CKP) Sensor - 2.3L Duratec-HE (MI4)