ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Cylinder Head Temperature (CHT) Sensor - 2.4L Duratorq-TDCi (Puma) Diesel-3.2L Duratorq-TDCi (Puma) Diesel > < Crankshaft Position (CKP) Sensor - 2.2L Duratorq-TDCi (Puma) Diesel

Transit 2006.5 (04.2006-)

Electronic Engine Controls - Cylinder Head Temperature (CHT) Sensor—2.4L Duratorq-Di/TDDi (Puma) Diesel Transit 2006.5 (04/2006-)
Removal and Installation

Special Tool(s)
303-680
Socket, Cylinder Head Temperature Sensor

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the intake manifold.
    Refer to: Intake Manifold (303-01C Engine - 2.4L Duratorq-TDCi (Puma) Diesel, In-vehicle Repair).

  1. Special Tool(s): 303-680
    Torque: 10 Nm

Installation

NOTE:
NOTE:Make sure that a new component is installed.
  1. To install, reverse the removal procedure

Cylinder Head Temperature (CHT) Sensor - 2.4L Duratorq-TDCi (Puma) Diesel-3.2L Duratorq-TDCi (Puma) Diesel > < Crankshaft Position (CKP) Sensor - 2.2L Duratorq-TDCi (Puma) Diesel