Lubricants, Fluids, Sealants and Adhesives
Item | Specification |
Refrigerant R134a | WSH-M17B19-A |
Refrigerant oil | WSH-M1C231-B |
Refrigerant Capacities (When Charging)
| Grams |
A/C system | 750 ± 20 |
A/C system with Auxiliary A/C system | 1400 ± 34 |
Refrigerant Oil Capacities (When Charging)
| millilitres |
A/C system | 280 |
A/C system with Auxiliary A/C system | 640 |
Addition of Refrigerant Oil (When new components are installed)
CAUTION:The refrigerant oil top-up quantity must not exceed the refrigerant oil fill quantity.
CAUTION:If other A/C components are being renewed in addition to the A/C compressor, there is no need to top up with additional refrigerant oil, apart from filling the compressor.
| millilitres |
When all lines and components are replaced. | Add 280. |
When all lines and components have been renewed (vehicles with additional air conditioning). | Add 640. |
Air conditioning (A/C) compressor - if the quantity of refrigerant oil drained from the faulty compressor is less than 150 ml | Drain 50 from new compressor. |
Air conditioning compressor - if the amount of refrigerant oil drained from the faulty compressor is more than 150 ml | Drain 0 from new compressor. |
Condenser | add 30. |
Evaporator | add 30. |
Accumulator/dehydrator | add 90. |
Always, if refrigerant was drained. | Add the same quantity as the quantity that was collected. |
Clutch air gap
| mm |
Compressor clutch air gap | 0.35 - 0.85 |
Tightening Torques
Description | Nm | lb-ft | lb-in |
Compressor drive plate retaining bolt | 13 | 10 | – |