Sprinter 2500 V6-3.0L DSL Turbo (2008)
18. Set the year by pressing the PLUS or MINUS button.
LIGHTING SUBMENU
You can reach the Lighting submenu via the Settings menu. The following are the settings you can make in the Lighting submenu:
-
Set constant headlamp mode
-
Switch the locator lighting on or off
-
Switch the exterior lighting delayed switch on or off
Setting constant headlamp mode
If you have set constant headlamp mode and the light switch is at 0, the following light up automatically when the engine is running:
-
The parking lamps and low-beam headlamps
-
The tail lamps
-
The license plate lamp
NOTE: For safety reasons, it is not possible to reset the Hdlmp. mode function to the factory setting while the vehicle is in motion. You will see
the following message in the display: Setting only possible at standstill USA only: If you turn the light switch to PARK LAMPS or LOW-BEAM,
the corresponding light switches on. Constant headlamp mode remains activated if the light switch is turned to AUTO. Canada only: If you turn the
light switch to LOW-BEAM, the low-beam headlamps are switched on. Constant headlamp mode remains activated if the light switch is turned to PARK
LAMPS or AUTO.
1. Press the PLUS or MINUS to select the Lighting submenu.
2. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Hdlmp" mode message in the display. The current setting is
highlighted.
3. Press the PLUS or MINUS button to select whether you wish to operate the lighting manually or whether you wish to set constant headlamp
mode.
Switching the locator lighting on or off
If you switch the locator lighting to On, the following lamps light up in the dark after you have unlocked the vehicle using the key:
-
The parking lamps
-
The tail lamps
-
The license plate lamp
-
The front foglamps
The locator lighting automatically switches off after 40 seconds or when you perform one of the following:
-
Open the driver's door
-
Insert the key into the ignition lock
-
Lock the vehicle with the key
4. Press the PLUS or MINUS to select the Lighting submenu.
5. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "Loc" lighting message in the display. The current setting is
highlighted.
6. Press the PLUS or MINUS button to switch the locator lighting On or Off.
Setting the exterior lighting delayed switch-off
The Headlamps (headlamps delayed switch-off) function enables you to set whether or not the exterior lighting should remain on in the dark after the
doors have been closed. When you have set the delayed switch-off and have switched off the engine, the following light up:
