Sprinter 2500 V6-3.0L DSL Turbo (2008)
The Trip computer menu displays the following statistical data for your vehicle:
-
Consumption statistics after start
-
Consumption statistics after reset
-
Reset Consumption statistics
NOTE: When you call up the trip computer again, it always displays the consumption statistics after start first. The units of the trip computer
are country-specific and depend on the setting in the Instrument submenu of the Settings menu.
Consumption statistics after start
1. Press the PAGE FORWARD or PAGE BACKWARDS button repeatedly until you see the "After start" message in the display.
If you turn the key to position 0 in the ignition lock or remove it, all the values are reset after approximately 4 hours. The values will not be reset if you
turn the key back to position 1 or 2 during this time.
Consumption statistics after reset
2. Press the PAGE FORWARD or PAGE BACKWARDS button repeatedly until you see the "After start" message in the display.
3. Press the UP ARROW or DOWN ARROW button repeatedly until you see the "After reset" message.
Resetting the consumption statistics
4. Press the PAGE FORWARD or PAGE BACKWARDS button repeatedly until you see the "After start" message in the display.
5. Press the UP ARROW or DOWN ARROW button repeatedly until you see the statistics that you want to reset in the display.
6. Press and hold the reset button on the left side of the instrument cluster until the values are reset to 0.The consumption statistics after start are
automatically reset after 999 hours or 9,999 miles (kilometers). The consumption statistics after reset are automatically reset after 9,999 hours or
99,999 miles (kilometers).
