Sprinter 2500 V6-3.0L DSL Turbo (2008)
Radiator Cooling Fan: Service and Repair
Radiator Fan - Installation
INSTALLATION
1. Install fan blade to viscous clutch. Tighten bolts (4) to 9 Nm (80 lbs. in.).
2. Install fan and clutch along with fan shroud in to engine bay area.
NOTE: The radiator fan assembly is attached (threaded) to the fan pulley. Install the fan blade/viscous fan drive assembly from the water
pump by turning the mounting nut counterclockwise as viewed from the front. Threads on the radiator fan drive are REVERSE
THREADED (LEFT-HAND THREAD).
3. Install the center bolt (3) of the viscous clutch. Using Counterholder 8930 or equivalent tool (2), tighten bolt to 45 Nm (33 lbs. ft.).
4. Attach coolant line to lower radiator shroud.
5. Properly align and clip the fan shroud into place.
6. Connect negative battery cable.