Sprinter 2500 V6-3.0L DSL Turbo (2008)
3.0L COOLING FAN SERPENTINE BELT WITH REAR A/C
CAUTION:
Do not attempt to check belt tension with a belt tension gauge on vehicles equipped with an automatic belt tensioner.
1. Remove the radiator fan and shroud assembly.
2. Using a suitable tool, rotate tensioner assembly (1) counterclockwise until tension has been relieved from the fan drive belt (3).
CAUTION:
Do not let the tensioner arm snap back to the freearm position, severe damage may occur to the tensioner.
3. Remove the fan drive belt (3).
