Sprinter 2500 V6-3.0L DSL Turbo (2008)
6. Separate the fuel supply line at the high pressure pump and fuel filter.
7. Remove the high pressure fuel line from the high pressure pump to the fuel rail.Â
8. Remove the high pressure lines from the fuel rail to fuel injectors.
9. Disconnect the fuel injector electrical connectors.
10. Remove the oil filter housing to engine cover bracket.
11. Lift up on the center of the return fuel line connector and separate the return fuel hose from fuel injectors.
12. Remove the fuel rail (2).
13. Remove the engine harness retainers and fasteners (2).
14. Remove the EGR valve (1).
15. Remove the fuel injectors (1).
