Sprinter 2500 V6-3.0L DSL Turbo (2008)
16. Remove the power brake booster hose and set aside.
17. Remove the cylinder head cover (2) fasteners, note the different size fasteners for assembly.
CAUTION: Care must be taken not to damage the cylinder head cover. If the sealant is difficult to separate, use a hand held heat gun and
warm the area thoroughly along the sealer bead.
18. Remove the cylinder head cover (2).
19. Remove the front camshaft oil seal (2).Â
20. Remove the left rear camshaft oil seal (2).
Right
RIGHT
