Sprinter 2500 V6-3.0L DSL Turbo (2008)
1. Disconnect the negative battery cable.
2. Remove the engine cover (3).
3. Remove the air inlet tube to the turbocharger along with the air cleaner cover (2).
4. Remove the air control valve resonator (2).
5. Remove the vacuum pump (1).
6. Remove the oil level indicator fastener (4).
7. Remove the oil separator (1) and rear housing adaptor (2).
8. Remove the injector cover.
9. Remove the fuel rail (2).
10. Remove the high pressure fuel lines at the injectors (3).