Sprinter 2500 V6-3.0L DSL Turbo (2008)
8. Install the 2 Rear throttle body bracket bolts (1).
9. Tighten the front EGR cooler-to-cylinder head bolts.
10. Tighten the rear EGR cooler-to-cylinder head bolts.
11. Tighten the upper rear EGR tube bolts.
12. Tighten the front EGR cooler-to-cylinder head bolts.
13. Tighten the front EGR tube bolts.
14. Reconnect the EGR bypass valve position sensor harness connector (1).
15. Reconnect the EGR Backpressure sensor harness connector (1).
16. Reconnect the EGR valve actuator harness connector (1).