C 1500 Truck 2WD V8-4.8L VIN V (2000)
13. Inspect and clean the hub (3).
Installation Procedure
1. Install the outer bearing cup into the hub using the J 8092 and the J 24426.
2. Install the bearing into the bearing cup.
3. Install the retaining ring into the groove.
4. Install the inner bearing cup using the J 8092 and the J 24427.
5. Drive the cup into place until the cup sits against the hub shoulder.
6. Install the inner bearing.
Important: Each time you remove the hub, install a new oil seal in order to prevent the hub from leaking.