C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
10. Install the wheelhouse inner panel push pin retainers (2).
11. Install the wheelhouse inner panel (1).
12. Install the engine mount-to-engine mount bracket bolts. (Right side shown, left side similar).
Tighten the engine mount-to-engine mount bracket bolts to 65 Nm (48 ft. lbs.).
Right
Engine Mount Replacement - Right
Removal Procedure
1. Remove the engine mount-to-engine mount bracket bolts.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting. See: Maintenance/Vehicle Lifting