C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
3. Remove the engine shield bolts.
4. Remove the engine shield.
5. Remove the Air Conditioning (A/C) compressor.
6. Remove the starter motor.
Important: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
7. Raise and suitably support the engine using adjustable (screw type) jack stands.
8. Remove the engine mount bolts.
9. Remove the right engine mount.
Installation Procedure
1. Position the right engine mount to the engine.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice