C 1500 Yukon 2WD V8-5.3L VIN Z Flex Fuel (2003)
2. Install the engine mount bolts.
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Remove the adjustable jack stands.
5. Install the starter motor.
6. Install the A/C compressor.
7. Position the engine shield to the vehicle.
8. Install the engine shield bolts.
Tighten the engine shield bolts to 20 Nm (15 ft. lbs.).
9. Lower the vehicle.