gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise|Page 2959 > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise|Page 2957
Page 1
background image

Output Shaft: Technical Service Bulletins
A/T - Transmission End Play

Number:

83-I-108

Section:

VIIC

Date:

August, 1983

Subject:

TRANSMISSION END PLAY - SERVICE INFORMATION THM 700 - R4 (ALL)

TO:

ALL CHEVROLET DEALERS

Some confusion exists on obtaining the correct transmission end play for THM 700-R4 transmissions. The following information will be
helpful to technicians when checking or setting end play.

Service Information

1.

Refer to the service manual for the correct procedure to check transmission end play.

FIGURE 1 - BEARING ASSEMBLY

2.

If end play is not within specification or cannot be brought within specification by changing the selective washer, the transmission
probably is misassembled. See Figure 1.

FIGURE 1 - BEARING ASSEMBLY

A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise|Page 2959 > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise|Page 2957