S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
Figure 2 - Bearing Assemblies and Thrust Washers
The most common type of misassembly, which affects end play, is either omitting or incorrectly installing bearing assemblies or thrust washers. If
misassembly is suspected, first check for proper installation of the bearing assembly (615) and selective thrust washer (616) shown in Figure 1. Next
check for proper installation of all other bearing assemblies and thrust washers as shown in Figure 2.
Figure 2 - Bearing Assemblies and Thrust Washers
ILL.
NO.
DESCRIPTION
601
WASHER, THRUST (PUMP TO DRUM)
608
SEALS, REVERSE INPUT CLUTCH -
INNER & OUTER
615
BEARING ASSEMBLY, STATOR SHAFT/
SELECTIVE WASHER
616
WASHER, THRUST (SELECTIVE)
622
SEAL, "O" RING INPUT TO FORWARD HSG.
624
SEAL, 3RD & 4TH CLUTCH-INNER & OUTER
629 SEAL, FORWARD CLUTCH-INNER & OUTER
631
SEAL, OVERRUN CLUTCH-INNER & OUTER
637
BEARING ASSEMBLY, INPUT SUN GEAR
660 WASHER, THRUST (INPUT CARRIER/RACE)
