Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil Dip Stick - Dip Stick Tube > Component Information > Service and Repair > Oil Level Indicator Tube Replacement > Page 1876

Page 1
background image

Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Filler Tube Replacement

Oil Filler Tube Replacement

Removal Procedure

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement   (See: Tune-up and Engine Performance Checks/Air Cleaner

Housing/Service and Repair).

2. Remove the retaining bolt for the coolant recovery reservoir and set the reservoir aside.
3. Remove the oil level indicator (418).
4. Remove the oil level indicator tube bolt (419).
5. Remove the oil level indicator tube (420) from the engine block.

Note:  The O-ring may be reused if not cut or damaged.

6. Inspect the O-ring seal for cuts or damage.
7. Remove the O-ring seal (421) from the tube, if required.

Installation Procedure

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil Dip Stick - Dip Stick Tube > Component Information > Service and Repair > Oil Level Indicator Tube Replacement > Page 1876

[PREV PAGE] [NEXT PAGE]