Accord L4-2.4L (2005)
1. Remove the A-pillar trim (A).
1. Pull out the door opening trim (B) as needed.
2. Pry the A-pillar cap (C) out until it is stopped by the hooks (D). Release the hooks and pull the cap out of the grommet (E). Discard the cap.
3. Pull the trim back by hand to detach the clip, then pull the trim up.
NOTE: The 2-door is shown, the 4-door is similar.
2. Install the trim in the reverse order of removal, and note these items:
-
Check the clips for damage or stress-whitening, and replace them with new ones.
-
Do not reuse the A-pillar cap; always replace it.
-
If the side curtain airbag has deployed, replace the A-pillar trim with a new one.
-
To prevent the side curtain airbag from accidentally deploying, removed trim pieces should be checked for these types of damage:
-
Any cracks, deformations, or press-whitenings in the A-pillar trim (A)
-
Any cracks, or press-whitenings in the grommet and clip seating surfaces (B)
-
Bent or broken grommet (C).
-
Replace any damaged parts with new ones.
-
Make sure the top of the trim overlaps with the headliner correctly.