Workshop Manuals Factory service & repair Hummer
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Hummer H2 V8-6.0L (2004)03 · Maintenance
03 · Maintenance

Vehicle Lifting: Service and Repair (page 2 of 3)

Make
Hummer
Model
H2
Engine
V8-6.0L
Year
2004
Section
Vehicle Lifting
MaintenanceService and Repair · page 2 of 3
background image

Position the (body/frame contact) rear hoist pads under the rear spring, just behind the hanger, for the tip-up pad only.

Vehicles with rear leaf springs.

IMPORTANT:  The rear hoist pads must not contact the body rocker panels or the floor pan.

JACKING

When you are lifting a vehicle with a vehicle jack or a floor jack, block the wheels at the opposite end from which you are lifting. Use jack stands to
provide additional support.

Under the Frame Rails

Position the floor jack pad under the frame rail pad.

IMPORTANT:  The floor jack pad must not contact rocker panel or the floor pan.

Under the Rear Differential

Position the floor jack pad under the center of the rear axle differential.
Care should be taken so as not to damage the establisher bar.

Under the Rear Spring Hanger

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2004 Hummer H2 6.0L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.