H2 V8-6.2L (2008)
Rear Door Hinge: Service and Repair
Rear Side Door Hinge Replacement
Removal Procedure
Important: To retain proper alignment, properly support the door and replace the hinges one at a time if possible.
1. Open the door.
2. Mark the hinge location with a grease pencil prior to removal.
3. Remove the 3 fasteners (1) retaining the hinge to the vehicle.
4. Remove the 2 fasteners (1) retaining the hinge to the door.
5. Remove the hinge.
Installation Procedure
1. With an assistant, align the hinge to the alignment marks made with the grease pencil.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the fasteners (1) retaining the hinge to the vehicle.
