H2 V8-6.2L (2008)
Rear Door Weatherstrip: Service and Repair
Front and Rear Side Door Upper Auxiliary Weatherstrip Replacement (SUT)
Front and Rear Side Door Upper Auxiliary Weatherstrip Replacement (SUT)
Removal Procedure
1. Open both front and rear side doors.
2. Remove the weatherstrip (2) by pulling the weatherstrip off of the bottom edge of the luggage carrier side rail.
3. Remove the weatherstrip from the side rail.
Installation Procedure
1. Starting at the center of the door openings, install the weatherstrip (2) to bottom edge of the luggage carrier side rail (1) and work across the right
and left sides towards the ends of the weatherstrip, being careful not to stretch the weatherstrip during installation.
2. Ensure the rear edge (2) of the upper auxiliary weatherstrip overlaps the top edge of the rear side door - rear auxiliary weatherstrip (3).
3. Use a roller-type tool to ensure the weatherstrip is fully seated.
4. Close the doors.
Front and Rear Side Door Upper Auxiliary Weatherstrip Replacement (SUV)
Front and Rear Side Door Upper Auxiliary Weatherstrip Replacement (SUV)
Removal Procedure