H2 V8-6.2L (2008)
Parking Brake Cable: Removal and Replacement
Parking Brake Front Cable Replacement
Parking Brake Front Cable Replacement
Removal Procedure
1. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Procedures/Parking Brake Cable Adjuster
Disabling) .
2. Remove the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement (See: Parking Brake Lever/Service and Repair/Parking
Brake Lever Pedal Assembly Replacement) .
3. Roll the carpet back to access cable grommet.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance) .
5. Disengage the grommet and the cable from the floor pan.
6. Disconnect the front cable from the rear cable.
7. Remove the cable from the body mount by depressing the retaining tabs.
8. Remove the cable.
Installation Procedure
