H2 V8-6.2L (2008)
1. Install the park brake warning lamp switch.
Notice: Refer to Fastener Notice .
2. Install the park brake warning lamp switch mounting bolt.
Tighten the bolt to 3 N.m (25 lb in).
3. Connect the park brake warning lamp switch connector.
4. Install the MID-Bussed Electrical Center bracket.
5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair/Battery Negative Cable Disconnection and Connection) .