H2 V8-6.2L (2008)
1. Install the coolant air bleed hose (1) to the pipe (2).
2. Position the hose clamp at the pipe.
3. Install the coolant air bleed hose to the throttle body.
4. Position the coolant air bleed hose clamp at the throttle body.
5. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair) .
6. Install the engine sight shield. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (See: Powertrain Management/Emission
Control Systems/Positive Crankcase Ventilation/PCV Valve Hose/Service and Repair) .
7. Add engine coolant, if necessary.