H2 V8-6.2L (2008)
1. Install the transfer case control module (2) to the bracket.
2. Ensure the transfer case control module bracket clips (1) are securely retaining the module.
3. Install the electrical connectors (1) to the transfer case control module (2).
4. Install the knee bolster. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Driver Knee Bolster Replacement) .
5. Program the module. Refer to Transfer Case Control Module Reprogramming (See: Procedures) .
6. Start the engine and test the automatic transfer case system for proper shift operation.