H2 V8-6.2L (2008)
1. If installing the right side bearing, perform the following steps:
1. Install the inner axle shaft housing into a vise.
Clamp only on the mounting flange of the inner axle shaft housing.
2. Install the bearing with the square shoulder in using the J 36609 (1) and the J 8092 (2).
2. If installing the right side inner axle shaft seal, perform the following steps:
1. Install the inner axle shaft housing into a vise.
Clamp only on the mounting flange of the inner axle shaft housing.
2. Install the new axle shaft seal using the J 45225 (1) and the J 8092 (2).
3. Install the inner axle shaft into the inner axle shaft housing.
Carefully tap the inner axle shaft into place with a soft-faced mallet.
4. Install the inner axle shaft and housing assembly to the differential carrier case assembly. Refer to Front Drive Axle Inner Shaft and Inner Shaft
Housing Replacement (See: Service and Repair/Removal and Replacement/Front Drive Axle/Front Drive Axle Inner Shaft and Inner Shaft
