Santa Fe FWD V6-2.7L (2007)
5. Remove the lower strut mounting bolts and pull the knuckle away from the strut.
Front strut assembly mounting bolt (to knuckle) torque:
15.5~17.5kgf-m (1 12.1~126.6 lb-ft)
6. Pull the CV shaft out of the knuckle/hub assembly by pushing down on the knuckle/lower control arm assembly and sliding the CV shaft out.
7. Remove any foreign material from the surface between the front hub (G) and the drive shaft (H) with a clean cloth.
