Ascender 2WD L6-4.2L (2003)
Center Mounted Brake Lamp: Customer Interest
Lighting - Center Mounted Stop Lamp Applique Loose
TSB SB06-11-S001
Rear Center High Mounted Stop Lamp (CHMSL)
Applique Sealing Strip Loose
ISSUE DATE: FEBRUARY 09, 2006
Affected Vehicles
2003-2006 Isuzu Ascender (US)
Service Information
Condition:
Some customers may comment that the sealing strip has come loose from the CHMSL applique.
Correction:
Repair or replace sealing strip.
Service Procedure
If the seal is not damaged, clean, apply weather-strip adhesive and reinstall. If the seal is damaged or missing, replace. The applique sealing strip is
located inside the top rear hatch. Adhesive may be loose anywhere along the sealing area.
Parts Information
Warranty Claim Information
Use the labor operation shown.
NOTE:
1.
Labor Time includes administrative time allowance.
2.
Information released on paper and electronic format prior to bulletin release cannot be updated. For the most current and up to date information
refer to the website
3.
Always refer to the Isuzu Service Policy Procedure Manual for specific details on warranty coverage and policies.