Power Steering Line/Hose: Specifications
- Make
- Isuzu
- Model
- Ascender 2WD
- Engine
- L6-4.2L
- Year
- 2003
- Section
- Hoses › Power Steering Line/Hose › Specifications
MaintenanceSpecifications · page 1 of 5
Power Steering Line/Hose: Specifications
Fastener Tightening Specifications
Power Steering Hose Assembly to the Frame Brackets Mounting Bolts; 10 Nm (7 ft. lbs.)
Power Steering Hose Assembly to the Front Crossmember Bracket Mounting Bolt; 10 Nm (7 ft. lbs.)
Power Steering Hose Assembly to the Power Steering Gear Retaining bolt; 12 Nm (9 ft. lbs.)
Power Steering Hose Assembly (Pressure Hose) to the Power Steering Pump; 25 Nm (18 ft. lbs.)
Power Steering Hose Assembly to the Wheel Well Bracket Mounting Bolt; 10 Nm (7 ft. lbs.)
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2003 Isuzu Ascender 4.2L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Isuzu power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.