Wheel Bearing: Adjustments

Make

Isuzu

Model

Hombre

Engine

L4-2.2L CPC

Year

1996

Section

Wheels and Tires › Wheel Bearing › Adjustments

MaintenanceAdjustments

Wheel Bearing: Adjustments

1. Raise and support vehicle.
2. Remove wheel covers.
3. Remove cap from hub and discard cotter pin.
4. While rotating wheel by hand, torque castle nut to 12 ft. lbs.
5. Loosen castle nut, then tighten by hand.
6. Loosen nut no more than 1/2 a flat and install new cotter pin.
7. Rotor end play should not exceed 0.001-0.005 inches.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

03 Maintenance