Hombre S Regular Cab L4-2.2L CPC (1997)
Alignment: Specifications
SPECIFICATIONS
Service Checking
Caster ................................................................................................................................................................................................... (2° ± 1°) +1° to +3°
Camber (B) ............................................................................................................................................................................................ (0° ±1°) -1° to +1°
Toe-In (Degrees per wheel)(C) ............................................................................................................................................. (+0.10° ± 0.10°) 0° to +0.20°
Total toe-in (C) ........................................................................................................................................................................... (+0.2° ± 0.2°) 0° to +0.4°
Service Setting
Caster (D) ................................................................................................................................................................................. (+2° ± 0.5°) +1.5° to +2.5°
Camber (A) .................................................................................................................................................................................. (0° ± 0.5°) -0.5° to +1.0°
Toe-In (Degrees per wheel)(C) ................................................................................................................................................ (+1° ± 0.5°) +0.5° to +1.5°
Total toe-in (C) ...................................................................................................................................................................... (+0.2° ± 0.1°) +0.1° to +0.3°
"Z" Trim Height
Dimensions .................................................................................................................... 73.0 mm ±6.0 mm (2.8 ± 0.2 inch) 67 to 79 mm 2.6 to 3.0 inch.
Variation [1] ............................................................................................................................................................................................. 6 mm (0.2 inch)
"D" Trim Height
Dimensions ..................................................................................................................................................................131.5 to 161.5 mm (5.2 to 6.4 inch)
Variation [2] ............................................................................................................................................................................................ 30 mm (1.2 inch)
Wheel Runout
Radial ................................................................................................................................................................................................ 1.015 mm (0.04 inch)
Lateral ............................................................................................................................................................................................. 1.143 mm (0.045 inch)
Wheel Type ................................................................................................................................................................................................................. Steel
NOTE: Vehicles must be jounced three times before checking alignment to eliminate false geometry readings, while doing this note the following.
a. Left and right side to be equal within 0.5°.
b. Left and right side to be equal within 1.0°.
c. Steering wheel must be held in the straight ahead position with ± 3.0°. Front individual toe must be equalizes relative to rear wheel thrust
angle.
d. GVW alignment is the same for all vehicles.
[1] Acceptable ride variation for both RWD vehicles.
[2] Acceptable ride variation for pickups.